The Controlled Compression Gasket cannot be over-tightened! The CCG is composed of the elastomer of your choice with a ring of ultem® vulcanized inside the seal from the ring O.D. to the locating ring. This non-compressible polymer controls clamp compression to exactly the correct amount, allowing the properly positioned seal to make a perfect surface I.D. with the ferrules. No intrusion of the hygienic seal in the product flow is possible.
Controlled Compression Gaskets
• Hygienic seal meets ASME-BPE
intrusion requirement of ± .020.
• Works with virtually any
manufacturer’s ferrules, fittings,
clamps or combination thereof.
• No torque requirement. Tighten
until it stops (we suggest wetting
the gasket with isopropyl alcohol
during installation to insure
uniform compression, especially
the 1" CCG).
• The CCG hygienic seal will allow
for slight misalignment and
ferrule face anomalies.
• Available in EPDM, FKM and
silicone.
• Can be tabbed for traceability or
non-tabbed with laser engraved • FDA compliant, 3A and Class VI
tested.
• First major gasket design patent
issued in the last 60 years.
• 1" to 3" sizes available
(excluding 2.5").
Meeting the Stringent
Standards For Purity
• U.S. Pharmacopeia Class VI
Certification
• Cytotoxicity Criteria
• Title 21 CFR 177.2600
• USDA and 3-A Sanitary Standards
• Current Good Manufacturing
Practices (CGMP)
• ASME-BPE Standards
• Animal Derived Ingredient Free
The Controlled Compression Gasket cannot be over-tightened! The CCG is composed of the elastomer of your choice with a ring of ultem® vulcanized inside the seal from the ring O.D. to the locating ring. This non-compressible polymer controls clamp compression to exactly the correct amount, allowing the properly positioned seal to make a perfect surface I.D. with the ferrules. No intrusion of the hygienic seal in the product flow is possible.
