 |
13 Commerce Way
Barrington, NH 03825
Phone: 603.664.7980
Fax: 603.664.7985
|
|
 |
BIO-PHARM FITTINGS....
VNE’s Bio-Pharm Fittings are manufactured in accordance to ASME BPE specifications. In addition to heat numbers being permanently etched, a manufacturing job number is also etched. This ensures total traceability for a consistent, high quality product manufactured specifically for the pharmaceutical and high purity markets.
BIO-PHARM FITTINGS SPECIFICATIONS....
Product: Bio-Pharm Fittings are produced to the ASME BPE Specifications.
Size Range: Bio - Pharm Fittings are available in sizes 1/2½ through 6½.
Materials: All Fittings are fabricated in T316L Stainless Steel for superior corrosion resistance and low carbon precipitation of welds.
Finish: A variety of surface finishes are available.
Marking: The products are etched with heat numbers, grade of material, ASME Code, Internal Surface Symbol (SFF#), plus VNE markings. Individual fittings fabricated of more than one original component during the manufacturing process will carry multiple heat numbers for full identification and traceability. Material Test Reports are shipped with every order.
|
BIO-PHARM FITTINGS SPECIFICATIONS....
Packaging: All of our Bio-Pharm Fittings are furnished capped and bagged. Each open port is capped and the fittings are individually sealed in a plastic bag. A label on each bag shows VNE Corporation, part number, material type, size, and Ra finish.
ORDERING SPECIFICATIONS....
- Specify:
- Quantity
- Product description or Part No.
- Size
- Material Type
- Finish Requirements
 |
| 13MHHM - HEAVY DUTY CLAMP |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304 |
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps. |
 |
 |
| 13MHHMD - DOUBLE HINGED HEAVY DUTY CLAMP |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304 |
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps. |
 |
 |
| 13MHHM-H - HEAVY DUTY CLAMP (Wing nut With Hole) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304 |
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps. |
 |
 |
| 13MHHS - THREE PIECE HEAVY DUTY CLAMP |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304 |
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps. |
 |
 |
| 13MHP - HIGH PRESSURE CLAMP |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304 |
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps. |
 |
 |
| EG13 - HIGH PRESSURE CLAMP |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304 |
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps. |
 |
 |
| EG2C - 90° ELBOW |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG2WU - CLAMP 180° U-BEND |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG2FPR - 90° ELBOW |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
|
EG2FTR - 90° ELBOW
|
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG2C-31CC - 90° REDUCING ELBOW (Non-Tapered) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG231-FPR 90° REDUCING ELBOW (Non-Tapered) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG2C-31PR - 90° REDUCING ELBOW (Non-Tapered) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG2K - 45° ELBOW |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG7 - TEE |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG7R - REDUCING TEE |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG9 - CROSS |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG28A - 45° CLAMP LATERAL |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG28B - CLAMP TRUE Y |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG14RT - RUBBER HOSE ADAPTER |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG14RT - RUBBER HOSE ADAPTER REDUCER (T316L) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG14HT - TYGON HOSE ADAPTER |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG17PR - ADAPTER |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG17TR - ADAPTER |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG21 - MALE ADAPTER (N.P.T. Pipe Threads) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG21-6L - MALE ADAPTER REDUCING (T316L) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG22 - FEMALE ADAPTER (N.P.T. Pipe Threads) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG22 - FEMALE ADAPTER REDUCING (T316L) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG31CC - CONCENTRIC REDUCER |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG32CC - ECCENTRIC REDUCER |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG31PC - ADAPTER REDUCER (Concentric) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG32PC - ADAPTER REDUCER (Eccentric) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG31CP - ADAPTER REDUCER (Concentric) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG32CP - ADAPTER REDUCER (Eccentric) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG31TC - ADAPTER REDUCER (Concentric) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG32TC - ADAPTER REDUCER (Eccentric) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG31CT - ADAPTER REDUCER (Concentric) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG32CT - ADAPTER REDUCER (Eccentric) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG28RA - 45° CLAMP REDUCING LATERAL |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG16A - SOLID END CAP |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
 |
| EG23B-6L - CLAMP THERMOMETER CAPS (T316L) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
| |
| EG16A - SOLID END CAP |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
| |
| |
| EG23B-6L - CLAMP THERMOMETER CAPS (T316L) |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
| |
 |
| Gaskets |
|
| Size Range: |
1/2˝ OD through 12˝ OD |
| Materials: |
T304
T316L |
| Finish: |
No. 7 - ID & OD
No. 5 - OD only
No. 3 - ID only
No. 1 - unpolished |
|
|
|
Note: One inch fittings take 1 1/2˝ clamps.
Fractional fittings take 3/4˝ clamps.
|
 |
|
|
|
|
