BioPure BioClamps™ are a patented plastic tri-clamp with quick release, specifically designed to meet the needs of busy pharmaceutical and bioprocessing laboratories.

Bio Clamps™ are moulded from glass reinforced nylon USP Class IV
BioClamps™reduce the distortion on polymeric components when subjected to heat
BioClamps™ are more compatible with current Pharmaceutical and Biotech manufacturing with greater flexibility in operation and single use disposal
Bio-Clamps™ can be repeatedly autoclaved at 134°C for 5 minutes
Bio-Clamps™ subjected to 60 kGy (6Mrad) showed no detectable weakening

BioPure BioBarbs™, hose tail to tri-clamp adapters are produced from DMF listed polypropylene that complies with FDA and USP Class VI test protocols.

The oversized hose barb design facilitates a strong adhesion to the tubing and ties may not be required.
Sanitary Bio Barbs™ feature a true bore design through the entire connector, and the barb design ensures a smooth transition from tubing to adaptor, reducing turbulence.
The identical ID of barb and tubing allows complete full drainage along an unimpeded flow path.
A slight raise at the port of the tri-clover face ensures proper capture of the gasket.
Every hosebarb has permanently moulded in it the production lot, and size identification.

Pouched in packs of 10 pieces.
European Patent Application EP.0402564.9

BioPure Y-BioBarbs™ are designed to meet the same high performance standards of our BioBarbs™.

They are produced from DMF listed polypropylene that complies with FDA and USP Class VI test protocols.
The oversized hose barb design facilitates a strong adhesion to the tubing and ties may not be required.
Bio-Ys™ feature a true bore design through the entire connector, and the barb design ensures a smooth transition from tubing to adapter, reducing turbulence.
The Y-junction splits the flow with minimum turbulence and optimum flow rate.
The identical ID of barb and tubing allows complete full drainage along an unimpeded flow path, and compression between the tube and fitting eliminates the by-pass of the media to potential entrapment areas.
Every Y has permanently moulded in it the production lot, and size identification.

Pouched in packs of 10 pieces.
European Patent Application EP.0402564.9

BioPure BioEnd Caps™ are designed to permanently terminate a disposable manifold until an in-process new sterile connection is to be made.

BioEnd Caps™ are produced from DMF listed polypropylene compliant with FDA and USP Class VI.
Uniquely constructed pull-tab ensures easy removal of the cap.
Pull-tab design for strength but sufficient pliability to avoid damage to packaging
Permanent moulded lot number identification to ensure total traceability
Part number, size, date of manufacture, lot number and statement of compliance printed on the packaging for ease of identification.

Pouched in packs of 10 pieces.