WCB-Flow Products

Fittings for the Pharmaceutical and Biotech Industries

WCB-Flow Products offers the widest range of fittings and surface finishes available for use in the Pharmaceutical and Biotech industries. Fittings are offered in a wide range of sizes from ½” through 6 ” in both buttweld and S-Line clamp connections according to ASME BPE standards. Interior surface finishes are available from 20 Ra Max mechanical polish to 10 Ra Max Electropolished per ASME BPE specifications. Additionally, BPE dimensionally compliant fittings also are offered in an unpolished surface finish.Material and Traceability

WCB-Flow Products offers fittings to BPE dimensions in 316L, and other specialty alloys. All fittings are permanently marked with original heat numbers allowing full traceability back to the original stainless steel supplier. MTR information is available for download from our website at www.spxprocessequipment .com. All tubular materials meet ASTM A269 / A270 requirements and all machined components meet the requirements of ASTM A479.

WCB-Flow Products S-Line Sanitary Fittings

S-Line connections consist of two matching ferrules, a gasket, and a clamp to compete this union. Utilizing these unions into a process piping system will ensure easy assembly and disassembly of process lines and equipment. If a change to a system becomes necessary, this can be accomplished quickly and easily with S-Line fittings. These versatile fittings were originally designed for both COP (clean-out of-place) and CIP (clean-in-place) applications.

  • Available in ½” through 12″
  • Fittings are made of T304 & T316L stainless steel.
  • Finishes are available in any combination as a standard.
  • ID polish is 180 Grit/25 Ra and Unpolished
  • OD polish is 150 Grit/32 Ra and Unpolished
  • Electropolished S-Line Fittings are offered.
  • Gaskets are available in Buna, EPDM, Teflon®, FKM, and Silicone as a standard.
  • Meets 3A and FDA requirements.

WCB-Flow Products Sanitary Weld Fittings

 Weld fittings are utilized in process piping systems where COP is not required or where CIP can be accomplished. These fittings can be welded manually or with automatic machines. Weld fittings are utilized to eliminate unnecessary joints and dead leg zones for product to become entrapped.

  • Available in ½” through 12″
  • Fittings are made of T304 & T316L stainless steel.
  • Finishes are available in any standard combination.
  • ID polish is 180 Grit
  • OD polish is 150 Grit
  • Electropolished weld fittings are available upon request.
  • Meets 3A and FDA requirements.

Read more…PDF